[Q] Useless Arndale board exynos5250

Code:

Checking Boot Mode ... SDMMC REVISION: 1.0 REVISION: 1.0 MMC Device 0: 7691 MB [ERROR] response timeout error : 00000104 cmd 1 [ERROR] response timeout error : 00000104 cmd 1 MMC Device 1: 0 MB MMC Device 2 not found *** Warning - using default environment

Hit any key to stop autoboot: 0 reading kernel..device 0 Start 1063, Count 10240 MMC read: dev # 0, block # 1063, count 10240 ... 10240 blocks read: OK completed reading RFS..device 0 Count 11303, Start 2048 MMC read: dev # 0, block # 11303, count 2048 ... 2048 blocks read: OK completed Boot with zImage ## Loading init Ramdisk from Legacy Image at 41000000 ... Image Name: Android Ramdisk Image Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 167666 Bytes = 167666 Load Address: 40800000 Entry Point: 40800000

Starting kernel ...

Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.31-g3370a7c () (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Feb 21 21:47:51 MST 2014 CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: ARNDALE Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Ignoring unrecognised tag 0x00000000 Memory policy: ECC disabled, Data cache writealloc S3C24XX Clocks, Copyright 2004 Simtec Electronics s3c_register_clksrc: clock audiocdclk has no registers set audiocdclk: no parent clock specified EXYNOS5: PLL settings, A=1400000000, B=1333090909, C=333000000 M=1600000000, E=96000000, V=300000000, G=533000000 EXYNOS5: ARMCLK=1400000000, CDREX=800000000, ACLK400=533000000 ACLK333=333000000, ACLK266=266666666, ACLK200=200000000 ACLK166=166500000, ACLK66=66666666 uclk1: source is mout_mpll_user (6), rate is 200000000 uclk1: source is mout_mpll_user (6), rate is 200000000 uclk1: source is ext_xtal (0), rate is 6000000 uclk1: source is mout_mpll_user (6), rate is 200000000 sclk_usbdrd30: source is mout_mpll (0), rate is 66666666 sclk_fimd: source is ext_xtal (0), rate is 24000000 aclk_266_gscl: source is aclk_266 (1), rate is 266666666 sclk_g3d: source is mout_mpll_user (0), rate is 800000000 sclk_sata: source is mout_mpll_user (0), rate is 66666666 sclk_gscl_wrap0: source is ext_xtal (0), rate is 24000000 sclk_gscl_wrap1: source is ext_xtal (0), rate is 24000000 sclk_cam0: source is ext_xtal (0), rate is 24000000 sclk_cam1: source is ext_xtal (0), rate is 24000000 PERCPU: Embedded 7 pages/cpu @c2036000 s7744 r8192 d12736 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938 Kernel command line: console=ttySAC2,115200n8 vmalloc=512M androidboot.console=ttySAC2 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 2047MB = 2047MB total Memory: 1839508k/1839508k available, 256620k reserved, 1735680K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xfea00000 - 0xffe00000 ( 20 MB) vmalloc : 0xd6800000 - 0xf6000000 ( 504 MB) lowmem : 0xc0000000 - 0xd6000000 ( 352 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc0043000 ( 236 kB) .text : 0xc0043000 - 0xc0724000 (7044 kB) .data : 0xc0724000 - 0xc07876a0 ( 398 kB) .bss : 0xc07876c4 - 0xc08e7978 (1409 kB) SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:552 Console: colour dummy device 80x30 Calibrating delay loop... 2795.11 BogoMIPS (lpj=6987776) [ 0.045000] pid_max: default: 32768 minimum: 301 [ 0.045000] Mount-cache hash table entries: 512 [ 0.045000] Initializing cgroup subsys debug [ 0.045000] Initializing cgroup subsys cpuacct [ 0.045000] Initializing cgroup subsys freezer [ 0.045000] CPU: Testing write buffer coherency: ok [ 0.045000] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.085000] CPU1: Booted secondary processor [ 0.095000] Brought up 2 CPUs [ 0.095000] SMP: Total of 2 processors activated (5590.22 BogoMIPS). [ 0.100000] gpio: GPZ has no PM function [ 0.100000] print_constraints: dummy: [ 0.100000] NET: Registered protocol family 16 [ 0.105000] SMDK MAIN Board Rev 0.2 (ADC value:783) [ 0.110000] ath6kl_set_platform_data ~~~~~~~~~~~~~~~~ [ 0.110000] hw-breakpoint: debug architecture 0x5 unsupported. [ 0.110000] exynos5_pmu_init: PMU supports 52XX(98) [ 0.110000] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.115000] EXYNOS5: Initializing architecture [ 0.115000] s3c-adc samsung-adc-v4: attached adc driver [ 0.115000] samsung-pd samsung-pd.0: power domain registered [ 0.115000] samsung-pd samsung-pd.1: power domain registered [ 0.115000] samsung-pd samsung-pd.8: power domain registered [ 0.115000] samsung-pd samsung-pd.9: power domain registered [ 0.115000] samsung-pd samsung-pd.10: power domain registered [ 0.115000] samsung-pd samsung-pd.11: power domain registered [ 0.115000] s3c24xx-pwm s3c24xx-pwm.0: tin at 66666666, tdiv at 66666666, tin=divclk, base 0 [ 0.115000] EXYNOS ASV PMIC MAXIM Detected! [ 0.115000] VDD_ARM[SG FUSED] ASV group is 6 [ 0.115000] VDD_INT[SG FUSED] ASV group is 6 [ 0.115000] VDD_MIF[SG FUSED] ASV group is 2 [ 0.115000] VDD_G3D[SG FUSED] ASV group is 6 [ 0.135000] bio: create slab <bio-0> at 0 [ 0.135000] print_constraints: VDD_1.8V: 1800 mV [ 0.135000] print_constraints: DC_5V: 5000 mV [ 0.135000] print_constraints: VDD_3.3V: 3300 mV [ 0.135000] print_constraints: DC_5V: 5000 mV [ 0.135000] rdev_init_debugfs: DC_5V: Failed to create debugfs directory [ 0.135000] print_constraints: CAM_SENSOR_0: 1800 mV [ 0.135000] SCSI subsystem initialized [ 0.140000] usbcore: registered new interface driver usbfs [ 0.140000] usbcore: registered new interface driver hub [ 0.140000] usbcore: registered new device driver usb [ 0.140000] s5m87xx 0-0066: S5M MFD Detected. DEVICE ID = 5 [ 0.140000] print_constraints: vdd_ldo4: 1800 mV [ 0.145000] print_constraints: vdd_mif range: 950 <--> 1300 mV at 1100 mV [ 0.145000] print_constraints: vdd_arm range: 800 <--> 1350 mV at 1200 mV [ 0.145000] print_constraints: vdd_int range: 900 <--> 1200 mV at 1200 mV [ 0.145000] print_constraints: vdd_g3d range: 700 <--> 1300 mV at 1200 mV [ 0.145000] print_constraints: vdd_ldo11 range: 1900 mV [ 0.145000] print_constraints: vdd_ldo14 range: 1900 mV [ 0.145000] s5m87xx 0-0066: S5M87xx MFD probe done!!! [ 0.145000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter [ 0.145000] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter [ 0.150000] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter [ 0.150000] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter [ 0.150000] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter [ 0.150000] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter [ 0.150000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter [ 0.150000] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.150000] Bluetooth: Core ver 2.16 [ 0.150000] NET: Registered protocol family 31 [ 0.150000] Bluetooth: HCI device and connection manager initialized [ 0.150000] Bluetooth: HCI socket layer initialized [ 0.150000] Bluetooth: L2CAP socket layer initialized [ 0.150000] Bluetooth: SCO socket layer initialized [ 0.150000] Switching to clocksource mct-frc [ 0.151036] Switched to NOHz mode on CPU #0 [ 0.154969] Switched to NOHz mode on CPU #1 [ 0.155058] cfg80211: Calling CRDA to update world regulatory domain [ 0.168386] NET: Registered protocol family 2 [ 0.168544] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.169053] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.169759] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.170546] TCP: Hash tables configured (established 65536 bind 65536) [ 0.170554] TCP reno registered [ 0.170564] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.170580] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.170784] NET: Registered protocol family 1 [ 0.170914] Trying to unpack rootfs image as initramfs... [ 0.176996] Freeing initrd memory: 160K [ 0.177086] PMU: registered new PMU device of type 0 [ 0.177237] Exynos5 : ARM Clock down on idle mode is enabled [ 0.177554] Loaded driver for PL330 DMAC-0 s3c-pl330 [ 0.177563] DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.177644] Loaded driver for PL330 DMAC-1 s3c-pl330 [ 0.177651] DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.177727] Loaded driver for PL330 DMAC-2 s3c-pl330 [ 0.177734] DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.183261] highmem bounce pool size: 64 pages [ 0.183466] ashmem: initialized [ 0.191472] fuse init (API version 7.16) [ 0.191787] msgmni has been set to 203 [ 0.192563] io scheduler noop registered [ 0.192571] io scheduler deadline registered [ 0.192607] io scheduler cfq registered (default) [ 0.405053] s5p-mipi-dsim s5p-mipi-dsim: DSI Master driver has been completed. [ 0.405064] s5p-mipi-dsim s5p-mipi-dsim: DSI Master state is stop state [ 0.677067] s5p-mipi-dsim s5p-mipi-dsim: mipi-dsi driver(RGB mode) has been probed. [ 0.677416] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.735283] s5pv210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 16) is a S3C6400/10 [ 0.750067] s5pv210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 20) is a S3C6400/10 [ 0.765066] s5pv210-uart.2: ttySAC2 at MMIO 0x12c20000 (irq = 24) is a S3C6400/10 [ 1.662745] console [ttySAC2] enabled [ 1.680066] s5pv210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 28) is a S3C6400/10 [ 1.701966] mali mali-t604.0: Probed as mali0 [ 1.705550] UMP: UMP device driver r1p0-04rel0 loaded [ 1.715955] brd: module loaded [ 1.720571] loop: module loaded [ 1.722300] ============ gps power probe !!!!! =============== [ 1.728459] ============ gps power reset !!!!! =============== [ 1.735146] print_constraints: AVDD1: at 3000 mV [ 1.739564] print_constraints: DCVDD: at 1000 mV [ 1.744579] wm8994 3-001a: WM8994 revision C [ 1.755066] wm8994 3-001a: No interrupt specified, no interrupts [ 1.759988] i2c-core: driver [wm8994] using legacy suspend method [ 1.765666] i2c-core: driver [wm8994] using legacy resume method [ 3.035047] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 392157Hz, actual 390625HZ div = 64) [ 3.085099] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.133326] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.141667] wm8994-codec wm8994-codec: Failed to request Mic1 short IRQ: -22 [ 3.148673] mmc1: new high speed SDHC card at address b368 [ 3.154087] wm8994-codec wm8994-codec: Failed to request Mic2 detect IRQ: -22 [ 3.161247] usb 1-3.2.4: new high speed USB device number 4 using s5p-ehci [ 3.168184] wm8994-codec wm8994-codec: Failed to request Mic2 short IRQ: -22 [ 3.175242] mmcblk0: mmc1:b368 MS 7.51 GiB [ 3.180693] mmcblk0: p1 p2 p3 p4 [ 3.210042] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.228610] asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok [ 3.233332] ALSA device list: [ 3.235603] #0: Arndale [ 3.238224] GACT probability NOT on [ 3.241672] Mirror/redirect action on [ 3.245349] u32 classifier [ 3.248028] Actions configured [ 3.251375] Netfilter messages via NETLINK v0.30. [ 3.256080] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.262784] ctnetlink v0.93: registering with nfnetlink. [ 3.267414] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 3.274338] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 3.280192] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 392157Hz, actual 390625HZ div = 64) [ 3.289939] xt_time: kernel timezone is -0000 [ 3.295867] IPv4 over IPv4 tunneling driver [ 3.299490] GRE over IPv4 demultiplexor driver [ 3.303431] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.308464] arp_tables: (C) 2002 David S. Miller [ 3.312922] TCP cubic registered [ 3.316714] NET: Registered protocol family 10 [ 3.323136] Mobile IPv6 [ 3.324117] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.329657] IPv6 over IPv4 tunneling driver [ 3.335051] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.344917] NET: Registered protocol family 17 [ 3.347923] NET: Registered protocol family 15 [ 3.352395] Bluetooth: RFCOMM socket layer initialized [ 3.357420] Bluetooth: RFCOMM ver 1.11 [ 3.361179] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.366436] Bluetooth: BNEP filters: protocol multicast [ 3.371651] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.377705] NET: Registered protocol family 35 [ 3.382475] rfkill_gpio rfkill_gpio: arndale-bt device registered. [ 3.388263] EXYNOS5250: Adaptive Support Voltage init [ 3.390070] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 392157Hz, actual 390625HZ div = 64) [ 3.402598] EXYNOS5250(SG): ORIG : 6 MOD : 0 RESULT : 6 [ 3.407866] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 3.415519] Registering SWP/SWPB emulation handler [ 3.420272] DVFS : VDD_ARM Voltage table set with 6 Group [ 3.425628] VDD_ARM : L0, 0 uV [ 3.428275] VDD_G3D : Voltage table set with 6 Group, exynos_lot_id : 0 [ 3.435246] VDD_ARM : L1, 0 uV [ 3.438262] VDD_ARM : L2, 0 uV [ 3.441313] VDD_ARM : L3, 0 uV [ 3.444329] VDD_ARM : L4, 0 uV [ 3.447378] VDD_ARM : L5, 1212500 uV [ 3.450932] VDD_ARM : L6, 1175000 uV [ 3.454468] VDD_ARM : L7, 1125000 uV [ 3.458039] VDD_ARM : L8, 1087500 uV [ 3.461596] VDD_ARM : L9, 1062500 uV [ 3.465145] VDD_ARM : L10, 1024999 uV [ 3.468769] VDD_ARM : L11, 1000000 uV [ 3.472424] VDD_ARM : L12, 975000 uV [ 3.475978] VDD_ARM : L13, 950000 uV [ 3.479516] VDD_ARM : L14, 937500 uV [ 3.483183] VDD_ARM : L15, 912500 uV [ 3.486638] VDD_ARM : L16, 900000 uV [ 3.490191] VDD_ARM : L17, 900000 uV [ 3.493728] VDD_ARM : L18, 900000 uV [ 3.497301] VDD_ARM : L19, 900000 uV [ 3.500853] VDD_ARM : L20, 900000 uV [ 3.504737] [ 6 ] Memory is not LPDDR type. [ 3.508627] DVFS : VDD_INT Voltage table set with 6 Group [ 3.513942] DVFS : VDD_INT Voltage of L0 level is 975000 [ 3.519323] DVFS : VDD_MIF Voltage table set with 0 Group [ 3.524685] DVFS : VDD_MIF Voltage of L0 level is 1037500 [ 3.531095] Failed to init busfreq. [ 3.533758] exynos_integrated_dvfs_hotplug_init, max(1700000),min(200000) [ 3.540515] ** temperature set value ** [ 3.540518] Throttling stop_temp = 82 start_temp = 85 [ 3.540523] Waring stop_temp = 95 start_tmep = 103 [ 3.540526] Tripping temp = 110 [ 3.540529] Hw_tripping temp = 113 [ 3.540532] Trhottling freq = 800000 Warning freq = 200000 [ 3.568542] TC_voltage stop_temp = 13 Start_temp = 10 [ 3.573656] exynos5250_find_busfreq_by_volt: req_volt has no value. [ 3.579891] get_busfreq_value error [ 3.583358] exynos_tmu_init: cpufreq_level[14], busfreq_value[0] [ 3.590362] Tmu Initialization is sucessful...! [ 3.596374] s3c-fb exynos5-fb.1: window 2: fb [ 3.600574] s3c-fb exynos5-fb.1: window 1: fb [ 3.604953] s3c-fb exynos5-fb.1: window 0: fb [ 3.612644] otg_wakelock_init: No OTG transceiver found [ 3.616432] s3c-rtc exynos-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.624923] Freeing init memory: 236K [ 3.636324] init: could not import file 'init.mt6620.rc' from '/init.arndale.rc' [ 3.642471] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 3.782918] init: cannot open '/initlogo.rle' [ 3.905808] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.930212] ASIX USB Ethernet Adapter:v4.4.0 21:45:46 Feb 21 2014 [ 3.930246] <6> http://www.asix.com.tw [ 3.939341] eth%d: status ep1in, 8 bytes period 11 [ 3.961136] EXT4-fs (mmcblk0p4): warning: checktime reached, running e2fsck is recommended [ 3.971457] eth0: register 'asix' at usb-s5p-ehci-3.2.4, ASIX AX88772A USB 2.0 Ethernet, 00:00:00:00:00:00 [ 3.980628] EXT4-fs (mmcblk0p4): recovery complete [ 3.987703] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic [ 5.610836] EXT4-fs (mmcblk0p3): warning: checktime reached, running e2fsck is recommended [ 6.010442] EXT4-fs (mmcblk0p3): recovery complete [ 6.114691] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic [ 6.186538] init: cannot find '/system/bin/rild', disabling 'ril-daemon' [ 6.237436] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 6.266535] adb_open [ 6.267283] mtp_bind_config [ 6.270272] adb_bind_config [ 6.275425] android_work: did not send uevent (0 0 (null)) :/ $ [ 7.293438] LOW resolution is reported [ 7.491024] ion_share_mmap: trying to map larger area than handle has available [ 7.498863] ion_share_mmap: trying to map larger area than handle has available [ 13.729169] warning: `zygote' uses 32-bit capabilities (legacy support in use) [ 14.505784] request_suspend_state: wakeup (3->0) at 14505776635 (2000-01-01 00:00:13.384388132 UTC) [ 14.514760] init: untracked pid 1426 exited [ 14.518119] init: untracked pid 1431 exited [ 16.843227] request_suspend_state: wakeup (0->0) at 16843219718 (2000-01-01 00:00:15.721830799 UTC) [ 16.851963] init: untracked pid 1806 exited [ 16.856005] init: untracked pid 1805 exited [ 22.096914] request_suspend_state: wakeup (0->0) at 22096905679 (2000-01-01 00:00:20.975517177 UTC) [ 22.107107] init: untracked pid 2003 exited [ 22.109837] init: untracked pid 2004 exited

[ 1.771653] Uniform Multi-Platform E-IDE driver [ 1.776367] ide-gd driver 1.18 [ 1.779439] rdac: device handler registered [ 1.783403] hp_sw: device handler registered [ 1.787594] emc: device handler registered [ 1.791672] alua: device handler registered [ 1.798285] ahci ahci: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 1.804559] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 1.812112] VDD_G3D : Voltage table set with 0 Group, exynos_lot_id : 0 [ 1.819530] scsi0 : ahci_platform [ 1.822325] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122fffff] port 0x100 irq 179 [ 1.830444] usbcore: registered new interface driver asix [ 1.835421] usbcore: registered new interface driver cdc_ether [ 1.841244] usbcore: registered new interface driver net1080 [ 1.846859] usbcore: registered new interface driver cdc_subset [ 1.852751] usbcore: registered new interface driver zaurus [ 1.858210] cdc_ncm: 04-Aug-2011 [ 1.861517] usbcore: registered new interface driver cdc_ncm [ 1.867040] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.873738] s5p-ehci s5p-ehci: S5P EHCI Host Controller [ 1.878753] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1 [ 1.885804] s5p-ehci s5p-ehci: irq 135, io mem 0x12110000 [ 1.900055] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00 [ 1.904418] hub 1-0:1.0: USB hub found [ 1.907722] hub 1-0:1.0: 3 ports detected [ 1.912129] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.917910] s5p-ohci s5p-ohci: Already power on PHY [ 1.922707] s5p-ohci s5p-ohci: s5p OHCI [ 1.926529] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2 [ 1.933551] s5p-ohci s5p-ohci: irq 135, io mem 0x12120000 [ 1.994539] hub 2-0:1.0: USB hub found [ 1.996836] hub 2-0:1.0: 3 ports detected [ 2.001359] exynos-xhci exynos-xhci: EXYNOS xHCI Host Controller [ 2.006805] exynos-xhci exynos-xhci: new USB bus registered, assigned bus number 3 [ 2.014545] exynos-xhci exynos-xhci: irq 136, io mem 0x12000000 [ 2.020648] hub 3-0:1.0: USB hub found [ 2.023941] hub 3-0:1.0: 1 port detected [ 2.028109] exynos-xhci exynos-xhci: EXYNOS xHCI Host Controller [ 2.033840] exynos-xhci exynos-xhci: new USB bus registered, assigned bus number 4 [ 2.041828] hub 4-0:1.0: USB hub found [ 2.045105] hub 4-0:1.0: 1 port detected [ 2.049467] usbcore: registered new interface driver cdc_acm [ 2.054641] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.062612] Initializing USB Mass Storage driver... [ 2.067596] usbcore: registered new interface driver usb-storage [ 2.073446] USB Mass Storage support registered. [ 2.078242] usbcore: registered new interface driver usbserial [ 2.083848] usbserial: USB Serial Driver core [ 2.088257] USB Serial support registered for pl2303 [ 2.093253] usbcore: registered new interface driver pl2303 [ 2.098655] pl2303: Prolific PL2303 USB to serial adaptor driver [ 2.104882] s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics [ 2.104887] s3c-udc : version 15 March 2009 [ 2.118676] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 2.124077] android_usb gadget: Number of LUNs=1 [ 2.128700] lun0: LUN: removable file: (no medium) [ 2.133901] android_usb gadget: android_usb ready [ 2.138214] Registered gadget driver 'android_usb' [ 2.142973] s3c-usbgadget s3c-usbgadget: Already power on PHY [ 2.148722] ata1: SATA link down (SStatus 0 SControl 300) [ 2.155169] android_work: did not send uevent (0 0 (null)) [ 2.159788] android_work: did not send uevent (0 0 (null)) [ 2.165478] mousedev: PS/2 mouse device common for all mice [ 2.171679] input: gpio-keys as /devices/platform/gpio-keys.0/input/input0 [ 2.178534] input: unidisplay_ts as /devices/platform/s3c2440-i2c.7/i2c-7/7-0041/input/input1 [ 2.186571] Unidisplay touch driver registered successfully [ 2.192568] S3C24XX RTC, (c) 2004,2006 Simtec Electronics [ 2.197219] s3c-rtc exynos-rtc: rtc disabled, re-enabling [ 2.202511] s3c-rtc exynos-rtc: rtc clk out disabled, re-enabling [ 2.208607] s3c-rtc exynos-rtc: warning: invalid RTC value so initializing it [ 2.216038] using rtc device, s3c, for alarms [ 2.219868] s3c-rtc exynos-rtc: rtc core: registered s3c as rtc0 [ 2.226016] usb 1-3: new high speed USB device number 2 using s5p-ehci [ 2.232633] i2c /dev entries driver [ 2.237173] Linux media interface: v0.10 [ 2.239962] Linux video capture interface: v2.00 [ 2.244540] many: s5k4ecgx_mod_init [ 2.248067] S5P MFC V4L2 Driver, (c) 2010 Samsung Electronics [ 2.253925] s5p-mfc s5p-mfc-v6: decoder registered as /dev/video6 [ 2.259866] s5p-mfc s5p-mfc-v6: encoder registered as /dev/video7 [ 2.266269] exynos-mdev.0: Media0[0xcbb9f800] was registered successfully [ 2.272709] exynos-mdev.1: Media1[0xcbb9e000] was registered successfully [ 2.279452] exynos-mdev.2: Media2[0xcbb9c800] was registered successfully [ 2.286290] s5p-mipi-csis.0 [ 2.286294] : s5pcsis_probe : csis0 probe success [ 2.293716] s5p-mipi-csis.1 [ 2.293719] : s5pcsis_probe : csis1 probe success [ 2.301588] S5K4ECGX 4-0056: s5k4ecgx_init_formats: [ 2.305904] S5K4ECGX 4-0056: s5k4ecgx_init_parameters: [ 2.311100] S5K4ECGX 4-0056: s5k4ecgx_stop_auto_focus: single AF Off command Setting [ 2.365942] hub 1-3:1.0: USB hub found [ 2.368283] hub 1-3:1.0: 3 ports detected [ 2.465059] exynos-mdev.1: Registered sensor subdevice S5K4ECGX [ 2.469520] [INFO]flite_probe:2485: FIMC-LITE0 probe success [ 2.475456] [INFO]flite_probe:2485: FIMC-LITE1 probe success [ 2.481042] [INFO]flite_probe:2485: FIMC-LITE2 probe success [ 2.488508] hdmiphy init start [ 2.490246] i2c i2c-2: attached exynos hdcp into i2c adapter successfully [ 2.496958] i2c-core: driver [exynos_hdcp] using legacy suspend method [ 2.503354] i2c-core: driver [exynos_hdcp] using legacy resume method [ 2.509773] Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd. [ 2.517577] s5p-hdmi exynos5-hdmi: hdmiphy i2c bus number = 8 [ 2.523407] hdmiphy_probe start [ 2.526238] s5p-hdmiphy 8-0038: probe successful [ 2.640185] s5p_hpd_kobject_uevent: sent uevent HDMI_STATE=offline [ 2.644976] s5p-hdmi exynos5-hdmi: probe sucessful [ 2.649804] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd. [ 2.657294] s5p-mixer s5p-mixer: probe start [ 2.661375] s5p-mixer s5p-mixer: resources acquired [ 2.666162] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi' [ 2.674302] usb 1-3.2: new high speed USB device number 3 using s5p-ehci [ 2.681155] s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16 [ 2.688259] s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17 [ 2.695329] s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18 [ 2.702438] s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19 [ 2.709375] s5p-mixer s5p-mixer: mixer0 create links [ 2.714319] s5p-mixer s5p-mixer: mixer1 create links [ 2.719273] s5p-mixer s5p-mixer: mixer links are created successfully [ 2.725714] s5p-mixer s5p-mixer: probe successful [ 2.730452] S5P CEC for Exynos4 Driver, (c) 2009 Samsung Electronics [ 2.736923] s5p-tvout-cec s5p-tvout-cec: probe successful [ 2.742213] exynos-rot exynos-rot: ++rot_probe [ 2.746655] exynos-rot exynos-rot: rotator registered successfully [ 2.752743] Initialize JPEG driver [ 2.756217] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12 [ 2.762823] s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11 [ 2.769756] Samsung Graphics 2D driver, (c) 2011 Samsung Electronics [ 2.775814] samsung-fake-battery samsung-fake-battery: samsung_fake_bat_probe [ 2.783793] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics [ 2.788889] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled [ 2.796914] device-mapper: uevent: version 1.0.3 [ 2.801289] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [ 2.809353] Bluetooth: HCI UART driver ver 2.2 [ 2.813756] Bluetooth: HCI H4 protocol initialized [ 2.818516] Bluetooth: HCI BCSP protocol initialized [ 2.823603] Bluetooth: HCILL protocol initialized [ 2.828155] Bluetooth: HCIATH3K protocol initialized [ 2.833298] hub 1-3.2:1.0: USB hub found [ 2.837295] hub 1-3.2:1.0: 4 ports detected [ 2.841175] cpuidle: using governor ladder [ 2.845821] cpuidle: using governor menu [ 2.849271] dw_mmc dw_mmc.0: Using internal DMA controller. [ 2.854679] mmc0: no vmmc regulator found [ 2.858882] dw_mmc dw_mmc.0: Version ID is 241a [ 2.863130] dw_mmc dw_mmc.0: DW MMC controller at irq 139, 32 bit host data width, 128 deep fifo [ 2.871956] dw_mmc dw_mmc.2: Using internal DMA controller. [ 2.877444] mmc1: no vmmc regulator found [ 2.881607] dw_mmc dw_mmc.2: Version ID is 241a [ 2.885935] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 2.890048] dw_mmc dw_mmc.2: DW MMC controller at irq 141, 32 bit host data width, 128 deep fifo [ 2.890139] dw_mmc dw_mmc.1: Using internal DMA controller. [ 2.890175] mmc2: no vmmc regulator found [ 2.890674] dw_mmc dw_mmc.1: Version ID is 241a [ 2.890699] dw_mmc dw_mmc.1: DW MMC controller at irq 140, 32 bit host data width, 128 deep fifo [ 2.891141] sdhci: Secure Digital Host Controller Interface driver [ 2.891148] sdhci: Copyright(c) Pierre Ossman [ 2.891598] mshci: Mobile Storage Host Controller Interface driver [ 2.891606] mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd [ 2.891617] Error: Driver 'dw_mmc' is already registered, aborting... [ 2.892259] S5P ACE Driver, (c) 2010 Samsung Electronics [ 2.961557] ACE: ecb-aes-s5p-ace [ 2.964695] ACE: cbc-aes-s5p-ace [ 2.967946] ACE: ctr-aes-s5p-ace [ 2.971175] ACE: sha1-s5p-ace [ 2.974071] ACE: sha256-s5p-ace [ 2.977145] ACE driver is initialized [ 2.981281] usbcore: registered new interface driver usbhid [ 2.986280] usbhid: USB HID core driver [ 2.990492] logger: created 256K log 'log_main' [ 2.994724] logger: created 256K log 'log_events' [ 2.999428] logger: created 256K log 'log_radio' [ 3.004034] logger: created 256K log 'log_system' [ 3.010131] Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics

Show Accepted Answer

Guest Quick Reply (No URL, BBcode or HTML)

Last post by okon.albina
2 hours ago
Last post by alex21
1 hour ago
Last post by sylvester.veum
3 hours ago
Last post by dicki.timmothy
1 hour ago
Last post by qlesch
1 hour ago
Last post by howell.jamel
4 hours ago
Last post by cremin.annie
2 hours ago