[Q] Help me unpack/re-pack my boot.img (Please =) )

Hi,

I'd like to un-pack my boot.img, but I've never done something like this before. Wishing to fix my Android device from 2010, a Creative ZEN Touch 2. It was my first Android device, and I'd like to fix it for knowledge and challenge, even thought it's old.

You can skip the part in blue to jump straight to the problem, but you would skip information about the actual device.

The device does not have any custom ROM developped for it, and no custom recoveries either - nothing exists. You would have to compile these yourself, something that I would wish to try eventually (Too hard). No flashing tools for this device exists either (Odin, or anything). So actually, if something goes wrong and you soft-brick/bootloop, you're screwed (Actually it does bootloop sometimes, randomly. But it's still booting sometimes). There is Android Recovery 3e, but it's useless. You could wipe /Data or /Cache, but you can't flash anything, unless it's signed (Tried to sign my update.zip with AndroidKitchen. Seems like it did worked, but Android Recovery 3e still reject it somehow).

So I would love to install Clockworkmod on it, so that way I would have a effective recovery method if something goes wrong. But before attempting to compile CWM (Look hard...), I thought I could get ADB to work. Since the manufacturer, Creative, does not encourage self-repair, it seems like they intentionally blocked ADB from default.prop (OMG... >__< ). I'd like to re-enable it first so I could get an extra repair tool (And typing all the commands on the terminal emulator on the small screen, horrible).
Yes, the device is rooted, since 2010, using Z4Root for Froyo.

Quote:
Originally Posted by GameX2

USB debugging is definitely enabled, and the device driver is also installed (Not even sure if I had to install a driver for this 2011 device in first place. Device is detected by computer without a problem).

If I type:

Code:
adb devices
The output is just: "List of devices attached" with a blank line.

If I try:
Code:
adb shell
This show up:
Code:
error: device not found
I can tell that ADB is working with 2 more devices.

Here is the content of default.prop:

Code:
# # ADDITIONAL_DEFAULT_PROPERTIES # ro.secure=1 ro.allow.mock.location=0 ro.debuggable=0 persist.service.adb.enable=0

I was told that to fix ADB, I should edit default.prop like this, but to properly edit it, I should unpack and repack boot.img:

Code:
ro.secure=1 ro.allow.mock.location=0 ro.debuggable=1 persist.sys.usb.config=mass_storage,adb persist.service.adb.enable=1

Here's also the content of my init.rc file:

Code:

on init

sysclktz 0

loglevel 3

# setup the global environment export PATH /sbin:/system/sbin:/system/bin:/system/xbin export LD_LIBRARY_PATH /system/lib export ANDROID_BOOTLOGO 1 export ANDROID_ROOT /system export ANDROID_ASSETS /system/app export ANDROID_DATA /data export EXTERNAL_STORAGE /mnt/sdcard export EXTERNAL_STORAGE_SD /mnt/sdcard export EXTERNAL_STORAGE_UDISK /mnt/udisk export EXTERNAL_STORAGE_EXTSD /mnt/extsd export ASEC_MOUNTPOINT /mnt/asec export SHM_MOUNTPOINT /mnt/shm export BOOTCLASSPATH /system/framework/core.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/android.policy.jar:/system/framework/services.jar

export BACKLIGHT_PATH /sys/class/backlight/tps60250/brightness export MAX_BACKLIGHT_PATH /sys/class/backlight/tps60250/max_brightness export VPU_FW_PATH /system/lib/firmware/vpu export CODEC_SHM_PATH /mnt/shm export GST_PLUGIN_PATH /system/lib/gst_plugins export CORE_REGISTER_FILE /system/etc/core_register export COMPONENT_REGISTER_FILE /system/etc/component_register export CONTENTPIPE_REGISTER_FILE /system/etc/contentpipe_register

export BUILD_TARGET earlgrey

export LOG_LEVEL 0 # Backward compatibility symlink /system/etc /etc symlink /sys/kernel/debug /d

# create mountpoints # mkdir /mnt 0775 root system # mkdir /mnt/sdcard 0000 system system # mkdir /mnt/udisk 0000 system system # mkdir /mnt/extsd 0000 system system

# Create cgroup mount point for cpu accounting mkdir /acct mount cgroup none /acct cpuacct mkdir /acct/uid

# Backwards Compat - XXX: Going away in G* symlink /mnt/sdcard /sdcard symlink /mnt/extsd /extsd symlink /mnt/udisk /udisk

# mkdir /system # mkdir /data 0771 system system mkdir /cache 0770 system cache mkdir /config 0500 root root

# Directory for putting things only root should see. mkdir /mnt/secure 0700 root root

# Directory for staging bindmounts mkdir /mnt/secure/staging 0700 root root

# Directory-target for where the secure container # imagefile directory will be bind-mounted mkdir /mnt/secure/asec 0700 root root

# Secure container public mount points. mkdir /mnt/asec 0700 root system mount tmpfs tmpfs /mnt/asec mode=0755,gid=1000

# shared memory used by middleware mkdir /mnt/shm 0777 system graphics mount tmpfs tmpfs /mnt/shm mode=0777,uid=1000,gid=1003,size=1m

#mount rootfs rootfs / ro remount

#mkdir /factory 0751 system system mount tmpfs tmpfs /factory size=131072

write /proc/sys/kernel/panic_on_oops 1 write /proc/sys/kernel/hung_task_timeout_secs 0 write /proc/cpu/alignment 4 write /proc/sys/kernel/sched_latency_ns 10000000 write /proc/sys/kernel/sched_wakeup_granularity_ns 2000000 write /proc/sys/kernel/sched_compat_yield 1 write /proc/sys/kernel/sched_child_runs_first 0

# Create cgroup mount points for process groups mkdir /dev/cpuctl mount cgroup none /dev/cpuctl cpu chown system system /dev/cpuctl chown system system /dev/cpuctl/tasks chmod 0777 /dev/cpuctl/tasks write /dev/cpuctl/cpu.shares 1024

mkdir /dev/cpuctl/fg_boost chown system system /dev/cpuctl/fg_boost/tasks chmod 0777 /dev/cpuctl/fg_boost/tasks write /dev/cpuctl/fg_boost/cpu.shares 1024

mkdir /dev/cpuctl/bg_non_interactive chown system system /dev/cpuctl/bg_non_interactive/tasks chmod 0777 /dev/cpuctl/bg_non_interactive/tasks # 5.0 % write /dev/cpuctl/bg_non_interactive/cpu.shares 52

# Set permission for FSL device node chmod 0777 /dev/mxc_vpu # allow access to uart port for gps module chmod 0777 /dev/ttymxc0 chmod 0777 /dev/ttymxc1 chmod 0777 /dev/ttymxc2

# for lcd driver work mode control chown system system /dev/ili9481 chmod 0771 /dev/ili9481

# mount ext4 partitions # Mount /system rw first to give the filesystem a chance to save a checkpoint mount ext4 /dev/block/mmcblk0p2 /system mount ext4 /dev/block/mmcblk0p2 /system rw remount

chmod 0555 /system/etc/install-recovery.sh

mount ext4 /dev/block/mmcblk0p5 /data nosuid nodev chown system system /data chmod 0771 /data

exec /system/etc/init.first_time.sh

mount ext4 /dev/block/mmcblk0p2 /system ro remount

# We chown/chmod /data again so because mount is run as root + defaults mount ext4 /dev/block/mmcblk0p5 /data nosuid nodev chown system system /data chmod 0771 /data

# Create dump dir and collect dumps. # Do this before we mount cache so eventually we can use cache for # storing dumps on platforms which do not have a dedicated dump partition. mkdir /data/dontpanic chown root log /data/dontpanic chmod 0750 /data/dontpanic

mkdir /data/synergy chown root log /data/synergy chmod 0777 /data/synergy

# Collect apanic data, free resources and re-arm trigger copy /proc/apanic_console /data/dontpanic/apanic_console chown root log /data/dontpanic/apanic_console chmod 0640 /data/dontpanic/apanic_console

copy /proc/apanic_threads /data/dontpanic/apanic_threads chown root log /data/dontpanic/apanic_threads chmod 0640 /data/dontpanic/apanic_threads

write /proc/apanic_console 1

# Same reason as /data above mount ext4 /dev/block/mmcblk0p6 /cache nosuid nodev chown system cache /cache chmod 0770 /cache

# This may have been created by the recovery system with odd permissions chown system cache /cache/recovery chmod 0770 /cache/recovery

#change permissions on vmallocinfo so we can grab it from bugreports chown root log /proc/vmallocinfo chmod 0440 /proc/vmallocinfo

#change permissions on kmsg & sysrq-trigger so bugreports can grab kthread stacks chown root system /proc/kmsg chmod 0400 /proc/kmsg chown root system /proc/sysrq-trigger chmod 0220 /proc/sysrq-trigger

# create basic filesystem structure mkdir /data/misc 01771 system misc mkdir /data/misc/bluetoothd 0770 bluetooth bluetooth mkdir /data/misc/bluetooth 0770 system system mkdir /data/misc/keystore 0700 keystore keystore mkdir /data/misc/vpn 0770 system system mkdir /data/misc/systemkeys 0700 system system mkdir /data/misc/vpn/profiles 0770 system system # give system access to wpa_supplicant.conf for backup and restore mkdir /data/misc/wifi 0770 wifi wifi chmod 0770 /data/misc/wifi chmod 0660 /data/misc/wifi/wpa_supplicant.conf mkdir /data/local 0771 shell shell mkdir /data/local/tmp 0771 shell shell mkdir /data/data 0771 system system mkdir /data/app-private 0771 system system mkdir /data/app 0771 system system mkdir /data/property 0700 root root mkdir /data/version 0770 root root

# create dalvik-cache and double-check the perms mkdir /data/dalvik-cache 0771 system system chown system system /data/dalvik-cache chmod 0771 /data/dalvik-cache

# create the lost+found directories, so as to enforce our permissions mkdir /data/lost+found 0770 mkdir /cache/lost+found 0770

# double check the perms, in case lost+found already exists, and set owner chown root root /data/lost+found chmod 0770 /data/lost+found chown root root /cache/lost+found chmod 0770 /cache/lost+found

# change permission for keymap file temporarily # should be removed when working out keymap later chmod 0777 /system/usr/keychars/qwerty.kcm.bin chmod 0777 /system/usr/keychars/Dell_Dell_USB_Keyboard.kcm.bin chmod 0777 /system/usr/keychars/mxckpd.kcm.bin chmod 0777 /system/usr/keychars/gpio-keys.kcm.bin chmod 0777 /system/usr/keychars/mxc_ts-keypad.kcm.bin chmod 0777 /system/usr/keychars/mxc_power_key.kcm.bin chmod 0777 /system/usr/keychars/AVRCP.kcm.bin

chmod 0777 /sys/class/graphics/fb0/fsl_disp_property chmod 0777 /sys/class/graphics/fb1/fsl_disp_property

on boot # basic network init ifup lo hostname localhost domainname localdomain

mkdir /data/system 0775 system system #exec /sbin/ts_calibrator exec system/xbin/flash.dump.sh # set RLIMIT_NICE to allow priorities from 19 to -20 setrlimit 13 40 40

# Define the oom_adj values for the classes of processes that can be # killed by the kernel. These are used in ActivityManagerService. setprop ro.FOREGROUND_APP_ADJ 0 setprop ro.VISIBLE_APP_ADJ 1 setprop ro.SECONDARY_SERVER_ADJ 2 setprop ro.BACKUP_APP_ADJ 2 setprop ro.HOME_APP_ADJ 4 setprop ro.HIDDEN_APP_MIN_ADJ 7 setprop ro.CONTENT_PROVIDER_ADJ 14 setprop ro.EMPTY_APP_ADJ 15

# Define the memory thresholds at which the above process classes will # be killed. These numbers are in pages (4k). setprop ro.FOREGROUND_APP_MEM 1536 setprop ro.VISIBLE_APP_MEM 2048 setprop ro.SECONDARY_SERVER_MEM 4096 setprop ro.BACKUP_APP_MEM 4096 setprop ro.HOME_APP_MEM 4096 setprop ro.HIDDEN_APP_MEM 5120 setprop ro.CONTENT_PROVIDER_MEM 5632 setprop ro.EMPTY_APP_MEM 6144

# Write value must be consistent with the above properties. # Note that the driver only supports 6 slots, so we have HOME_APP at the # same memory level as services. write /sys/module/lowmemorykiller/parameters/adj 0,1,2,7,14,15

write /proc/sys/vm/lowmem_reserve_ratio 1 write /proc/sys/vm/overcommit_memory 1 write /proc/sys/vm/min_free_order_shift 4 write /sys/module/lowmemorykiller/parameters/minfree 1536,2048,4096,5120,5632,6144

# Set init its forked children's oom_adj. write /proc/1/oom_adj -16

# Tweak background writeout write /proc/sys/vm/dirty_expire_centisecs 200 write /proc/sys/vm/dirty_background_ratio 5

# Permissions for System Server and daemons. chown radio system /sys/android_power/state chown radio system /sys/android_power/request_state chown radio system /sys/android_power/acquire_full_wake_lock chown radio system /sys/android_power/acquire_partial_wake_lock chown radio system /sys/android_power/release_wake_lock chown radio system /sys/power/state chown radio system /sys/power/wake_lock chown radio system /sys/power/wake_unlock chmod 0660 /sys/power/state chmod 0660 /sys/power/wake_lock chmod 0660 /sys/power/wake_unlock #chown system system /sys/class/timed_output/vibrator/enable chown system system /sys/class/leds/keyboard-backlight/brightness chown system system /sys/class/leds/lcd-backlight/brightness chown system system /sys/class/leds/button-backlight/brightness chown system system /sys/class/leds/jogball-backlight/brightness chown system system /sys/class/leds/red/brightness chown system system /sys/class/leds/green/brightness chown system system /sys/class/leds/blue/brightness chown system system /sys/class/leds/red/device/grpfreq chown system system /sys/class/leds/red/device/grppwm chown system system /sys/class/leds/red/device/blink chown system system /sys/class/leds/red/brightness chown system system /sys/class/leds/green/brightness chown system system /sys/class/leds/blue/brightness chown system system /sys/class/leds/red/device/grpfreq chown system system /sys/class/leds/red/device/grppwm chown system system /sys/class/leds/red/device/blink #chown system system /sys/class/timed_output/vibrator/enable chown system system /sys/class/haptic/oneshot chown system system /sys/module/sco/parameters/disable_esco chown system system /sys/kernel/ipv4/tcp_wmem_min chown system system /sys/kernel/ipv4/tcp_wmem_def chown system system /sys/kernel/ipv4/tcp_wmem_max chown system system /sys/kernel/ipv4/tcp_rmem_min chown system system /sys/kernel/ipv4/tcp_rmem_def chown system system /sys/kernel/ipv4/tcp_rmem_max chown root radio /proc/cmdline # Chmod/chown FSL specific sys entry chown radio system /sys/devices/platform/mxc_dvfs_core.0/enable chown radio system /sys/devices/platform/busfreq.0/enable chown system system /sys/class/backlight/tps60250/brightness chmod 0660 /sys/devices/platform/mxc_dvfs_core.0/enable chmod 0660 /sys/devices/platform/busfreq.0/enable chmod 0660 /sys/class/backlight/tps60250/brightness

write /sys/devices/platform/busfreq.0/enable 1 write /sys/devices/platform/mxc_dvfs_core.0/enable 1

# allow control power for ecompass and gsensor chown system system /sys/class/i2c-adapter/i2c-0/0-001c/akm8973_ctl chmod 0777 /sys/class/i2c-adapter/i2c-0/0-001c/akm8973_ctl #chown system system /sys/class/i2c-adapter/i2c-0/0-001d/power_ctl #chmod 0777 /sys/class/i2c-adapter/i2c-0/0-001d/power_ctl

# for GPS gpio driver for gps power and bootmode control chown system system /dev/gps_gpio chown system system /sys/devices/virtual/gps/gps_gpio/gps_power chown system system /sys/devices/virtual/gps/gps_gpio/gps_bootmode chmod 0771 /dev/gps_gpio chmod 0660 /sys/devices/virtual/gps/gps_gpio/gps_power chmod 0771 /sys/devices/virtual/gps/gps_gpio/gps_bootmode

# for Sensor HAL chown system system /dev/accel chown system system /dev/akm8973_dev chown system system /dev/akm8973_aot chmod 0777 /dev/accel chmod 0777 /dev/akm8973_dev chmod 0777 /dev/akm8973_aot

# Define TCP buffer sizes for various networks # ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax, setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,110208 setprop net.tcp.buffersize.wifi 4095,87380,110208,4096,16384,110208 setprop net.tcp.buffersize.umts 4094,87380,110208,4096,16384,110208 setprop net.tcp.buffersize.edge 4093,26280,35040,4096,16384,35040 setprop net.tcp.buffersize.gprs 4092,8760,11680,4096,8760,11680

# Set property for FSL specific feature # Init second display connection state setprop rw.SECOND_DISPLAY_CONNECTED 0 # Define gst player property setprop media.gstreamer.enable-player 0

# Comment the usage of stageflight media framework setprop media.stagefright.enable-scan 0 setprop media.stagefright.enable-player 0 setprop media.stagefright.enable-record 0 setprop media.stagefright.enable-http 0 setprop media.stagefright.enable-meta 0

# Define fsl avi/aac/asf/mkv/flv/flac format support setprop ro.FSL_AVI_PARSER 1 setprop ro.FSL_AAC_PARSER 1 setprop ro.FSL_ASF_PARSER 1 setprop ro.FSL_FLV_PARSER 1 setprop ro.FSL_MKV_PARSER 1 setprop ro.FSL_FLAC_PARSER 1

# Define fsl display init mode setprop ro.FSL_LANDSCAPE_MODE 1

# Define fsl xec mode setprop xec.dls.enabled 1 setprop xec.aa.enabled 1 setprop xec.dls.rate 0 setprop xec.aa.rate 100

# Define fsl dvfs property setprop ro.dvfs.enabled 1

# Define UI to TVOUT,change this setting to 1 and uncomment below write commands setprop ro.UI_TVOUT_DISPLAY 0 #write /sys/class/graphics/fb0/blank 1 #write /sys/class/graphics/fb1/blank 1 #write /sys/class/graphics/fb2/blank 1 #write /sys/class/graphics/fb0/fsl_disp_property 1-layer-fb #write /sys/class/graphics/fb1/mode U:720x480i-60\n #write /sys/class/graphics/fb1/blank 0 chown system system /sys/class/graphics/fb1/blank chmod 0644 /sys/class/graphics/fb1/blank chown system system /sys/class/graphics/fb1/mode chmod 0644 /sys/class/graphics/fb1/mode #chown system system /sys/devices/platform/mxc_sdc_fb.0/graphics/fb0/blank #chmod 0644 /sys/devices/platform/mxc_sdc_fb.0/graphics/fb0/blank

# Define default notification_sound setprop ro.config.notification_sound OnTheHunt.ogg

# for switch on/off framebuffer chown system system /sys/devices/platform/mxc_sdc_fb.0/graphics/fb0/blank chown system system /sys/devices/platform/mxc_sdc_fb.1/graphics/fb1/blank chown system system /sys/devices/platform/mxc_sdc_fb.2/graphics/fb2/blank chmod 0644 /sys/devices/platform/mxc_sdc_fb.0/graphics/fb0/blank chmod 0644 /sys/devices/platform/mxc_sdc_fb.1/graphics/fb1/blank chmod 0644 /sys/devices/platform/mxc_sdc_fb.2/graphics/fb2/blank

# ALSA mixer naming define setprop alsa.mixer.playback.master Playback setprop alsa.mixer.capture.master Capture setprop alsa.mixer.playback.speaker Playback setprop alsa.mixer.playback.headset Headphone setprop alsa.mixer.capture.headset Capture

# Prepare for wifi setprop wifi.interface wlan0 mkdir /data/misc/wifi/sockets 0770 wifi wifi mkdir /data/misc/dhcp 0770 dhcp dhcp chown dhcp dhcp /data/misc/dhcp

# DD partitions for diversity and ECD key region for access chmod 0751 /factory chown system system /factory chmod 0777 /dev/block/mmcblk0 chmod 6777 /system/bin/dd chown system system /system/bin/toolbox exec /system/xbin/init.diversity.ecd.sh

# mount calibration data region chown system system /dev/block/mmcblk0 chmod 0777 /dev/block/mmcblk0 chmod 0777 /sys/module/pd_ts13892/parameters/calibration exec /system/xbin/init.calibration.sh exec /system/bin/ts13892_calibrator

chmod 751 /system/xbin/flash_sync

# Prepare for bluetooth # chown bluetooth bluetooth /sys/class/rfkill/rfkill0/type # chmod 666 /sys/class/rfkill/rfkill0/state # chown bluetooth bluetooth /sys/class/rfkill/rfkill0/state # write /sys/class/rfkill/rfkill0/state 0

# Enable USB host1'remote wakeup event wakeup android system # write /sys/bus/platform/drivers/fsl-ehci/fsl-ehci.1/power/wakeup enabled

# Prepare for RIL setprop gsm.ril.delay 15

#change file permission for synergy chown root shell /system/etc/synergy_fts.sh chmod 0550 /system/etc/synergy_fts.sh

class_start default

## Daemon processes to be run by init. ## service console /system/bin/sh console

# adbd is controlled by the persist.service.adb.enable system property service adbd /sbin/adbd user root group root disabled

# adbd on at boot in emulator #on property:ro.kernel.qemu=1 # start adbd

on property:persist.service.adb.enable=1 start adbd

on property:persist.service.adb.enable=0 stop adbd

service servicemanager /system/bin/servicemanager user system critical onrestart restart zygote onrestart restart media

service vold /system/bin/vold socket vold stream 0660 root mount ioprio be 2

service netd /system/bin/netd socket netd stream 0660 root system

service dispd /system/bin/dispd socket dispd stream 0660 root system

service debuggerd /system/bin/debuggerd

service ril-daemon /system/bin/rild -l /system/lib/libreference-ril.so -- -d /dev/ttyUSB3 -u /dev/ttyUSB0 socket rild stream 660 root radio socket rild-debug stream 660 radio system user root group radio cache inet misc audio

service zygote /system/bin/app_process -Xzygote /system/bin --zygote --start-system-server socket zygote stream 666 onrestart write /sys/android_power/request_state wake onrestart write /sys/power/state on onrestart restart media

service media /system/bin/mediaserver user media group system audio camera graphics inet net_bt net_bt_admin net_raw ioprio rt 4

service bootanim /system/bin/bootanimation user graphics group graphics disabled oneshot

service dbus /system/bin/dbus-daemon --system --nofork socket dbus stream 666 bluetooth bluetooth user bluetooth group bluetooth net_bt_admin

service bluetoothd /system/bin/bluetoothd -n socket bluetooth stream 660 bluetooth bluetooth socket dbus_bluetooth stream 660 bluetooth bluetooth # init.rc does not yet support applying capabilities, so run as root and # let bluetoothd drop uid to bluetooth with the right linux capabilities group bluetooth net_bt_admin misc disabled

service hcid /system/bin/hcid -s -n -f /etc/bluez/hcid.conf socket bluetooth stream 660 bluetooth bluetooth socket dbus_bluetooth stream 660 bluetooth bluetooth # init.rc does not yet support applying capabilities, so run as root and # let hcid drop uid to bluetooth with the right linux capabilities group bluetooth net_bt_admin misc disabled service hciattach /system/bin/logwrapper /system/bin/sh /system/etc/mxc_bt.sh user bluetooth group bluetooth net_bt_admin disabled oneshot service hfag /system/bin/sdptool add --channel=10 HFAG user bluetooth group bluetooth net_bt_admin disabled oneshot

service hsag /system/bin/sdptool add --channel=11 HSAG user bluetooth group bluetooth net_bt_admin disabled oneshot

service opush /system/bin/sdptool add --channel=12 OPUSH user bluetooth group bluetooth net_bt_admin disabled oneshot

service pbap /system/bin/sdptool add --channel=19 PBAP user bluetooth group bluetooth net_bt_admin disabled oneshot

service synergy_fts_init /system/etc/synergy_fts.sh user root group sdcard_rw oneshot

service synergysdpops /system/etc/synergy_sdptool.sh 12 0x1105 ReservedOPPS user root disabled oneshot

#service hidloopback /system/etc/insert-hiddrv.sh # user root # oneshot

service installd /system/bin/installd socket installd stream 600 system system

service flash_recovery /system/etc/install-recovery.sh oneshot

service racoon /system/bin/racoon socket racoon stream 600 system system # racoon will setuid to vpn after getting necessary resources. group net_admin disabled oneshot

service mtpd /system/bin/mtpd socket mtpd stream 600 system system user vpn group vpn net_admin net_raw disabled oneshot

service keystore /system/bin/keystore /data/misc/keystore user keystore group keystore socket keystore stream 666

service dumpstate /system/bin/dumpstate -s socket dumpstate stream 0660 shell log disabled oneshot

#service dhcpcd /system/bin/logwrapper /system/bin/dhcpcd -d -B wlan0 service dhcpcd /system/bin/dhcpcd -d -B wlan0 disabled oneshot

service wpa_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \ -Dwext -iwlan0 -c/data/misc/wifi/wpa_supplicant.conf user root group wifi inet socket wpa_wlan0 dgram 660 wifi wifi oneshot

#service pppd_gprs /etc/init.gprs-pppd #user root #group radio cache inet misc #disabled #oneshot

service akmd2 /system/bin/akmd2 user system group system oneshot

# save diversity.bin from memory to emmc service div_restore_m /system/bin/dd if=/factory/diversity.bin of=/dev/block/mmcblk0 obs=512 seek=14337 count=1 user root group system disabled oneshot

# restore diversity.bin from diversity data service div_restore_w /system/bin/dd if=/factory/diversity.master of=/dev/block/mmcblk0 obs=512 seek=14336 count=1 user root group system disabled oneshot

# flash sync service flash_sync /system/xbin/flash_sync user root group system

service synergy_exe /system/xbin/synergy_exe user root

service a2dp_adapter /system/bin/csr_liba2dp_process user root group system audio camera graphics inet net_bt net_bt_admin

service flash_wifi /system/xbin/flash_wifi disabled oneshot

service wlan0_check /system/xbin/wlan0_check disabled oneshot

I've dumped several partitions, including /boot with romdump and dd:

Code:
dd if=/dev/bootimg of=/mnt/sdcard/boot.img bs=<your boot size> count=1

But I've never figured out the boot size correcly. Is this dangerous if I didn't entered the boot size, because I didn't knew was it is? As far as I know, my re-packed boot.img should be the same size, because I only have to edit default.prop, correct?

Then I've listed the partitions:

Code:

$cat /proc/mtd dev: size erasesize name $cat /proc/partitions major minor #blocks name

179 0 7815168 mmcblk0 179 1 4309200 mmcblk0p1 179 2 154035 mmcblk0p2 179 3 1 mmcblk0p3 179 4 10395 mmcblk0p4 179 5 3145873 mmcblk0p5 179 6 41076 mmcblk0p6 $

Using the app "DiskInfo", I believe I've found which partition was /Boot. Here's what I see:

SD Card:
Mount points: /mnt/sdcard, /mnt/secure/asec (This is an INTERNAL SD card)
Partition name: mmcblk0p1
Total Space: 4.1GB

System:
Mount point: /system (ext4)
Partition Name: mmcblk0p2
Total Space: 128MB

???
Not mounted;
Partition name: mmcblk0p3
Total space: 1KB (What the hell? What is that partition??)

??? (Sound like Boot. But it does actually contain the JPEG files from Android Recovery 3e, so it does look like the /Recovery partition instead. While it DOES contain the default.prop file I'm looking for. But if this is /Recovery, where is /Boot ??? Just, not there, or the boot files are in the recovery partition as well?)
Not mounted;
Partition name: mmcblk0p4
Total space: 10,2MB

Data:
Mount point: /data (ext4)
Partition name: mmcblk0p5
Total space: 3GB (2,6GB free)

Cache:
Mount point: /cache (ext4)
Partition name: mmcblk0p6
Total space: 38,7MB (32,3 MB free)

TMPFS MOUNT POINTS:

/dev: Total space: 91,6MB, 12KB used
/mnt/asec: Total space: 91,6MB, 0KB used
/mnt/shm: Total space: 1MB, used: 20KB
/factory: Total space: 128KB, used: 64KB
/mnt/sdcard/.android_secure: Unknow size

***

POST TOO LONG - Next part in the next post
I've attached Boot (Or Recovery) .img to this post. Zipped the IMG in a ZIP file.

Show Accepted Answer

Guest Quick Reply (No URL, BBcode or HTML)

Last post by irau
2 hours ago
Last post by blanche20
3 hours ago
Root LG k550
Started by gcollins
Last post by chaz76
1 hour ago
Last post by bonita89
39 minutes ago
Last post by ldare
3 hours ago
Last post by elmo09
3 hours ago
Last post by dmetz
1 hour ago
Last post by amcdermott
3 hours ago
Last post by sanford.tiana
1 hour ago
Last post by tara82
53 minutes ago
Last post by kstreich
2 hours ago